Wood working machine--sanders
                                      
 Wide Belt Sander SSR1300 & SSR1300Q Conveyer Feeding Single Head  
Features:
Model SSR1300 wide belt sander is suitable for calibrating ,sanding integrated materials board, chipboard etc..
Model SSR1300Q sanding belt speed drive is frequency conversion, wide speed range, suitable for sanding kinds of lacquer surface or fancy pieces.
Adopting foundry frame, the sanding units can not be disorted easily and have good effect of vibration & absorption.
Fault display makes maintenance and repair easy. When fault happens, the machine will be powered off ,brake ,the table fall and protect workpieces from being damaged. Imported PLC is used to control motors running, sanding belt swing and thickness display, whick guarantees the anti-jamming function of the machine.
Specifications
 Model No.
SSR1300
SSR1300Q
Working width
40-1300mm
40-1300mm
Working thickness
3-100mm
3-100mm
Working length
≥500mm
≥320mm
No1 abrasive belt speed
20m/s
3-12m/s
Feed speed
6-30m/min
6-30m/min
Size of abrasive belt (WxP)
1330x2200mm
1330x2620mm
Total motor power
41.74kw
20.57kw
Main motor
37kw
15kw
Working air pressure
0.55Mpa
0.55Mpa
Consumption of compressed air
0.1m3/min
0.9m3/min
Volume of sucked air
7500m3/h
7000m3/h

Speed of sucked air

25-30m/s
25-30m/s
Overall dimension (LxWxH)
1800x2690x2010mm
2210x2040x2320mm
Net weight
2500kg
3200kg
                                    
 Wide Belt Sander SRP600 Conveyer Feeding Double Head  
 Model No.
SRP600-1
SRP600-2
SRP600Q
Working width
40-600mm
40-600mm
40-600mm
Working thickness
3-125mm
3-125mm
3-125mm
Working length
≥500mm
≥500mm
≥450mm
No.1 abrasive belt speed
18m/s
18m/s
1-18m/s
No.2 abrasive belt speed
12m/s
12m/s
 
Feed speed
4-16m/min
4-16m/min
4-16m/min
Size of abrasive belt (WxP)
630x1900mm
630x1900mm
630x1900mm
Total motor power
18.62kw
20.62kw
7.62kw
Main motor
11kw,5.5kw
11kw,7.5kw
5.5kw
Working air pressure
0.55Mpa
0.55Mpa
0.55Mpa
Consumption of compressed air
0.1m3/min
0.1m3/min
0.3m3/min
Volume of sucked air
4500m3/h
4500m3/h
4500m3/h

Speed of sucked air

25-30m/s
25-30m/s
25-30m/s
Overall dimension (LxWxH)
1850x1190x1970mm
1850x1190x1970mm
1850x1190x1970mm
Net weight
1600kg
1600kg
1400kg
                                    
 Wide Belt Sander SRP1000 Conveyer Feeding Double Head  
Features:
Model SRP1000 wide belt sander is suitable for calibrating and sanding door board, floor board, furniture board etc.
Adopting foundry frame, the sanding units can not be distorted easily and have good effect of vibration & absorption.
Fault display makes maintenance and repair easy. When fault happens, the machine will be powered off, brake, the table fall and protect workpieces from being damaged. Imported PLC is used to control motor running, sanding belt swing and thickness display, which guarantees the anti-jamming function of the machine.
Specifications

Model No.

SRP1000-1
SRP1000-2
SRP1000Q
Working width
40-1000mm
40-1000mm
40-1000mm
Working thickness
3-100mm
3-100mm
3-100mm
Working length
≥600mm
≥600mm
≥500mm
No.1 abrasive belt speed
18m/s
20m/s
1-10m/s
No.2 abrasive belt speed
14m/s
10m/s
 
Feed speed
6-30m/min
6-30m/min
6-30m/min
Size of abrasive belt (WxP)
1030x2200mm
1030x2200mm
1030x2200mm
Total motor power
39.94kw
31.74kw
9.74kw
Main motor
22kw,15kw
18.5kw,11kw
7.5kw
Working air pressure
0.55Mpa
0.55Mpa
0.55Mpa
Consumption of compressed air
0.1m3/min
0.1m3/min
0.5m3/min
Volume of sucked air
9000m3/h
9000m3/h
6000m3/h

Speed of sucked air

25-30m/s
25-30m/s
25-30m/s
Overall dimension (LxWxH)
2265x1740x2180mm
2265x1740x2180mm
1800x2310x2000mm
Net weight
3000kg
2700kg
2000kg
                                    
 Wide Belt Sander SRP1300 Conveyer Feeding Double Head  

Features:
Model SRP1300-1 is mainly suitable for calibrating, sanding and polishing integrated materials board, solid board, composite floor, plywood, block board etc..
Model SRP1300-2 is mainly used to calibrate sand and polish solid board ,plywood, block board, composite floor etc..
Model SRP1300-3 is mainly used to calibrating sand basic material of multi-layer wood flooring and plywood etc..
Model SDC1300 is suitable for calibrating, precision sanding blackboard, solid board, facing board etc..
Adopting foundry frame, the sanding units can not be distorted easily and have good effect of vibration & absorption.
Fault display makes maintenance and repair easy When fault happens, the machine will be powered off, brake, the table fall and protect workpieces from being damaged. Imported PLC is used to control mature running, sanding belt swing and thickness display, which guarantees the anti-jamming function of the machine.
Specifications

Model No.

SRP1300-1
SRP1300-2
SRP1300-3
SDC1300
Working width
40-1300mm
40-1300mm
40-1300mm
40-1300mm
Working thickness
2.5-100mm
2.5-100mm
2.5-100mm
2.5-100mm
Working length
≥640mm
≥530mm
≥470mm
≥630mm
No.1 abrasive belt speed
19m/s
19m/s
19m/s
18m/s
No.2 abrasive belt speed
18m/s
12m/s
18m/s
12m/s
Feed speed
6-30m/min
6-30m/min
6-30m/min
6-30m/min
Size of abrasive belt (WxP)
1330x2200mm
1330x2200mm
1330x2200mm
1330x2200mm
Total motor power
63.74kw
49.74kw
63.74kw
37.74kw
Main motor
37kw,22kw
30kw,15kw
37kw,22kw
22kw,11kw
Working air pressure
0.55Mpa
0.55Mpa
0.55Mpa
0.55Mpa
Consumption of compressed air
0.1m3/min
0.1m3/min
0.1m3/min
0.1m3/min
Volume of sucked air
9500m3/h
9000m3/h
9500m3/h
9000m3/h

Speed of sucked air

25-30m/s
25-30m/s
25-30m/s
25-30m/s
Overall dimension (LxWxH)
2280x2040x2240mm
2280x2040x2240mm
2280x2040x2240mm
2280x2040x2240mm
Net weight
3700kg
3500kg
3500kg
3300kg
                                    
 Wide Belt Sander SRAP600 Conveyer Feeding Three Head  

Specifications

Model No.

SRAP600-3
SRAP600T
Working width
40-600mm
40-600mm
Working thickness
3-90mm
3-80mm
Working length
≥450mm
≥500mm
1#No1 abrasive belt speed
18m/s
24m/s
2#No1 abrasive belt speed
18m/s
24m/s
3#No1 abrasive belt speed
12m/s
20m/s
Feed speed
4-16m/min
4-16m/min
Size of abrasive belt (WxP)
630x1525mm
630x2300mm
Total motor power
30.32kw
39.94kw
Main motor
11kw,11kw,5.5kw
15kw,11kw,11kw
Working air pressure
0.55Mpa
0.55Mpa
Consumption of compressed air
0.07m3/min
0.1m3/min
Volume of sucked air
6000m3/h
6000m3/h

Speed of sucked air

25-30m/s
25-30m/s
Overall dimension (LxWxH)
2204x1240x1836mm
2700x2000x2180mm
Net weight
2300kg
3850kg
                                    
 Wide Belt Sander SRAP1300 Conveyer Feeding Three Head  

Features:
Model SRAP1300-1 is suitable for calibrating, and precision sanding and especially for plywood, chipboard, MDF etc.
Model SRAP1300-2 is suitable for powerful calibrating sanding and especially for integrated materials board, solid board, block board etc.
Model SRAP1300-3 is mainly used for calibrating and precision sanding MDF, plywood, chipboard etc..
Adopting foundry frame, tube sanding units can not be distorted easily and have good effect of vibration &absorption,
Fault display makes maintenance and repair easy. When fault happens, tube machine will be power off, brake, tube table fall and protect workpieces
from being damaged. Imported PLC is used to control motors running, sanding belt swing and thickness display, which guarantees the anti-jamming function of the machine.
Specifications
 Model No.
SARP1300-1
SRAP1300-2
SRAP1300-3
Working width
40-1300mm
40-1300mm
40-1300mm
Working thickness
2.5-100mm
2.5-100mm
2.5-100mm
Working length
≥630mm
≥500mm
≥630mm
1#No1 abrasive belt speed
21m/s
21m/s
21m/s
2#No1 abrasive belt speed
18m/s
21m/s
21m/s
3 #No1 abrasive belt speed
12m/s
12m/s
18m/s
Feed speed
6-30m/min
6-30m/min
6-30m/min
Size of abrasive belt (WxP)
1330x2200mm
1330x2200mm
1330x2200mm
Total motor power
88.62kw
88.62kw
95.62kw
Main motor
37kw,30kw,15kw
37kw,30kw,15kw
37kw,30kw,22kw
Working air pressure
0.55Mpa
0.55Mpa
0.55Mpa
Consumption of compressed air
0.2m3/min
0.2m3/min
0.2m3/min
Volume of sucked air
12000m3/h
12000m3/h
12000m3/h

Speed of sucked air

25-30m/s
25-30m/s
25-30m/s
Overall dimension (LxWxH)
2625x2680x2130mm
2280x2680x2130mm
2280x2680x2130mm
Net weight
4700kg
4700kg
4800kg
                                    
 Wide Belt Sander SRAP1300T Conveyer Feeding Three Head  

Features:
Model SRAP1300T is mainly suitable for fine sanding plywood, solid board, block board, wood board etc.
Specifications
Working width
40-1300mm
Working thickness
3-110mm
Working length
≥200mm
Feed speed
6-30m/min
Main motor power
30kw,22kw,15kw
Feeding Motors
5.5kw
Size of belt (WXP)
1330x2620mm
Working air pressure
0.55Mpa
Volume of sucked air
12000m3/h
Consumption of compressed air
0.1m3/h
Overall dimension (LxWxH)
2860x2030x2320mm
Net weight
7400kg
Type SRP 1600
Working width 40-1600mm
Working thickness 3-100mm
No:1 abrasive belt speed 20m/s
No:2 abrasive belt speed 17m/s
Feed speed 6-30m/min
Size of abrasive belt(W×P) 1630 × 2500mm
Total motor power 74kw
Working air pressure 0.55MPa
Volume of sucked air 12000m 3 /h
Speed of sucked air 25-30m/s
Overall dimension(L×W×H) 2340×2980×2140mm
Net weight 4500kg
All rights for technical modifications reserved. CE approval
Type SRP 2000
Working width 40-2000mm
Working thickness 3-120mm
No:1 abrasive belt speed 20m/s
No:2 abrasive belt speed 18m/s
Feed speed 6-30m/min
Size of abrasive belt(W × P) 2020 × 2900mm
Total motor power 74.7kw
Working air pressure 0.55MPa
Volume of sucked air 15000m 3 /h
Speed of sucked air 25-30m/s
All rights for technical modifications reserved. CE approval
                                          
 Wide Belt Sander SARP600 with CE Approval  

SARP600

Working width 40-600mm
Working thickness 3-125mm
Working length > 400mm
No:1 abrasive belt speed 18m/s
No:2 abrasive belt speed 12m/s
No:3abrasive belt speed 12 m/s
Feed speed 6-30m/min
Size of abrasive belt (W × P) 630 ×1525mm
Total motor power 26.12 kw
Working air pressure 0.55MPa
Volume of sucked air 25-30m/s
Speed of sucked air 4500m 3 /h
Overall dimension(L × W × H) 2173×1220×1801mm
Net weight 2230kg
All rights for technical modifications reserved. CE approval
                                          
 Wide Belt Sander SARP1300 with CE Approval  

            SRAP1300-1
           SRAP1300-2

     SRAP1300-3

Type SRAP 1300-1 SRAP 1300-2 SRAP 1300-3
Working width 40-1300mm 40-1300mm 40-1300mm
Working thickness 2.5-100mm 2.5-100mm 2.5-100mm
Working length ≥ 630mm ≥ 500mm ≥ 630mm
No:1 abrasive belt speed 20m/s 20m/s 20m/s
No:2 abrasive belt speed 18m/s 20m/s 20m/s
No:3 abrasive belt speed 12 m/s 12 m/s 18m/s
Feed speed 6-30m/min 6-30m/min 6-30m/min
Size of abrasive belt (W×P) 1330×2200mm 1330×2200mm 1330×2200mm
Total motor power 87.12 kw 87.12 kw 94.12 kw
Working air pressure 0.55MPa 0.55MPa 0.55MPa
Volume of sucked air 9500m 3 /h 9500m 3 /h 9500m 3 /h
Speed of sucked air 25-30m/s 25-30m/s 25-30m/s
Overall dimension(L×W×H) 2625×2680×2020mm 2625×2680×2020mm 2625×2680×2020mm
Net weight 4500kg 4500kg 4500kg
All rights for technical modifications reserved. CE approval
                                          
 Wide Belt Sander SARP1600 with CE Approval  

SRAP1600

Type SRAP 1600
Working width 40-1600mm
Working thickness 3-100mm
No:1 abrasive belt speed 20m/s
No:2 abrasive belt speed 18m/s
No:3abrasive belt speed 12m/s
Feed speed 6-30m/min
Size of abrasive belt(W×P) 1630*2500mm
Total motor power 92.85kw
Working air pressure 0.55MPa
Volume of sucked air 13000m 3 /h
Speed of sucked air 25-30m/s
Overall dimension(L×W×H) 2340×2980×2140mm
Net weight 5500kg
All rights for technical modifications reserved. CE approval
                                          
 Wide Belt Sander SARP2000 with CE Approval  

SRAP2000

Type SRAP 2000
Working width 40-2000mm
Working thickness 3-120mm
No:1 abrasive belt speed 20m/s
No:2 abrasive belt speed 18m/s
No:3abrasive belt speed 11m/s
Feed speed 6-30m/min
Size of abrasive belt (W × P) 2020 × 2900mm
Total motor power 114.1kw
Working air pressure 0.55MPa
Volume of sucked air 20000m 3 /h
Speed of sucked air 25-30m/s
Overall dimension(L × W × H) 2990 × 3430 × 2460mm
Net weight 9100kg
All rights for technical modifications reserved. CE approval
                                          
 Wide Belt Sander SRP600 with CE Approval  

SRP600-1

SRP600-2

Type SRP600-1 SRP600-2
Working width 40-600mm 40-600mm
Working thickness 3-125mm 3-125mm
No:1 abrasive belt speed 18m/s 18m/s
No:2 abrasive belt speed 12m/s 12m/s
Feed speed 4-16m/min 4-16m/min
Size of abrasive belt (W×P) 630 × 1525mm 630×1525mm
Total motor power 20.37kw 18.37kw
Working air pressure 0.55MPa 0.55MPa
Volume of sucked air 4500m 3 /h 4500m 3 /h
Speed of sucked air 25-30m/s 25-30m/s
Overall dimension (L×W×H) 1730×1240×1845mm 1730×1240×1845mm
Net weight 1600kg 1600kg
All rights for technical modifications reserved. CE approval
                                          
 Wide Belt Sander SRP600-3 with CE Approval  

SRP600-3

Working width 40-600mm
Working thickness 3-100mm
Abrasive belt speed 1-18m/s
Feed speed 3-15m/min
Size of abrasive belt (W×P) 635 × 1760mm
Total motor power 7.62kw
Working air pressure 0.55MPa
Volume of sucked air 4500m 3 /h
Speed of sucked air 25-30m/s
Overall dimension(L×W×H) 1730×1240×1890mm
Net weight 1390kg
All rights for technical modifications reserved. CE approval
                                          
 SRP 13D Double Side Calibrating Sander   

SRP13D

Model No.
SRP13D
Working Thickness 
3~90mm
Working Length 
>900mm
Working Width
200~1300mm
Sanding Belt Speed 
24 m/s  
Size of Sanding Belt (W×P)
1350×2800mm
Feeding Speed
6~30m/min
Power
Main Motor
75kW×2
Feeding Motor
11kW
Lifting Motor
1.5kW
Brush Motor
0.75kW×2
Compressed Air
Pressure
0.6 MPa
Air Consumption
0.15m3/min
Suction Air Consumption
Volume
24000m3/h
Pressure
1300Pa
Average Air Speed
25~30m/s
Overall Dimension(L×W×H)
2200×3360×2900mm
Net Weight
15 T
All rights for technical modifications reserved. CE approval
                                          
 SRP 16D Double Side Calibrating Sander   

 

 

 

 

 

 

 

 

   SRP16D

Parameter

SRP 16D

Working Width 100~~1600mm
Working Length >900mm
Working Thickness 3~~120mm
Sanding Belt Front 24 m/s
Rear  
Size of Sanding Belt (W × P) 1670 × 2850mm
Feeding Speed 6~~30m/min
Power Main Motor Front 75kW × 2
Rear  
Feeding Motor 11kW
Lifting Motor 1.5kW
Brush Motor 1.1kW × 2
Compressed Air Pressure 0.6 MPa
Air Consumption 0.15m 3 /min
Suction Air Consumption Volume 24000m 3 /h
Pressure 1300Pa
Average Air Speed 25~~30m/s
Net Weight 19T
All rights for technical modifications reserved. CE approval
                                          
 SRP 20D Double Side Calibrating Sander   

SRP20D

Parameter

SRP 20D

Working Width 120~~1900mm
Working Length >900mm
Working Thickness 3~~120mm
Sanding Belt Front 26 m/s
Rear ——
Size of Sanding Belt (W × P) 1950 × 2850mm
Feeding Speed 6~~30m/min
Power Main Motor Front 90kW × 2
Rear ——
Feeding Motor 15kW
Lifting Motor 1.5kW
Brush Motor 2.2kW × 2
Compressed Air Pressure 0.6 MPa
Air Consumption 0.5m 3 /min
Suction Air Consumption Volume 33000m 3 /h
Pressure 1300Pa
Average Air Speed 25~~30m/s
Net Weight 27T
All rights for technical modifications reserved. CE approval
                                          
 SR 13 Roller Feeding Sanders  

SR13

Model

SR13

Working width

40 ~ 1300mm

Working thickness

2.5 ~ 110mm

Size of abrasive belt

1330 × 2615 mm

Feed Speed

1 ~ 80m/min

Main motor power

55kW

Feed motor power

7.5kW

Working air pressure

0.55MPa

Speed of sucked air

25 ~ 30m/s

Volume of sucked air

8000m 3 /h

Overall dimension

2115 × 3080 × 2440mm

Net mass

6500kg

All rights for technical modifications reserved. CE approval
                                          
 SR 13D Double Side Calibrating Sander  

 

Model No.
SR13D
Working Thickness 
3~90mm
Working Length 
>700mm
Working Width
100~1300mm
Sanding Belt Speed 
29 m/s  /  25 m/s
Size of Sanding Belt (W×P)
1350×2800mm
Feeding Speed
6~30m/min
Power
Main Motor
75kW×2
Feeding Motor
11kW
Lifting Motor
1.5kW
Brush Motor
0.75kW×2
Compressed Air
Pressure
0.6 MPa
Air Consumption
0.15m3/min
Suction Air Consumption
Volume
24000m3/h
Pressure
1300Pa
Average Air Speed
25~30m/s
Overall Dimension (L×W×H)
2200×3360×2900mm
Net Weight
15 T
All rights for technical modifications reserved. CE approval

 

 

 

 

 

 

 

 

 

                                          
 SR 16D Double Side Calibrating Sander

SR16D

Parameter

SR 16D

Working Width 120~~1630mm
Working Length >700mm
Working Thickness 3~~120mm
Sanding Belt Front 26 m/s
Rear  
Size of Sanding Belt (W × P) 1670 × 2850mm
Feeding Speed 6~~30m/min
Power Main Motor Front 75kW × 2
Rear  
Feeding Motor 11kW
Lifting Motor 1.5kW
Brush Motor 1.1kW × 2
Compressed Air Pressure 0.6 MPa
Air Consumption 0.5m 3 /min
Suction Air Consumption Volume 24000m 3 /h
Pressure 1300Pa
Average Air Speed 25~~30m/s
Net Weight 17T
All rights for technical modifications reserved. CE approval
                                          
 SR 20D Double Side Calibrating Sander  

SR20D

Parameter

SR 20D

Working Width 120~~1900mm
Working Length >700mm
Working Thickness 3~~120mm
Sanding Belt Front 26 m/s
Rear  
Size of Sanding Belt (W × P) 1950 × 2850mm
Feeding Speed 6~~30m/min
Power Main Motor Front 90kW × 2
Rear  
Feeding Motor 15kW
Lifting Motor 1.5kW
Brush Motor 2.2kW × 2
Compressed Air Pressure 0.6 MPa
Air Consumption 0.5m 3 /min
Suction Air Consumption Volume 33000m 3 /h
Pressure 1300Pa
Average Air Speed 25~~30m/s
Net Weight 21T
All rights for technical modifications reserved. CE approval
                                          
 Wide Belt Sander SR3A13 with CE Approval  

SR3A13

Model
SR3A13
Working Width
40~1300mm
Working Thickness
2.5~110mm
Working Length
≥750mm
No. 1 Sanding Belt Speed
20m/s
No. 2 Sanding Belt Speed
20m/s
No. 3 Sanding Belt Speed
14m/s
Feed Speed
13~100m/min
Size of Sanding Belt
1330×2615 mm
Total Motors Power
106kW
Main Motor Power
37,30,30kW
Working Air Pressure
0.55MPa
Consumption of Compressed Air
0.1 m3/min
Speed of Sucked Air
25~30m/s
Volume of Sucked Air
12000m3/h
Overall Dimension
3150×2780×2520mm
Net Weight
11000kg
All rights for technical modifications reserved. CE approval
                                          
 SR3C 13 Roller Feeding Sanders   

SR3C13

Model

SR3C13

Working width

40 ~ 1300mm

Working thickness

2.5 ~ 110mm

Size of abrasive belt

1330 × 2615 mm

Feed Speed

13 ~ 100m/min

Main motor power

37,30,30kW

Feed motor power

7.5kW

Working air pressure

0.55MPa

Speed of sucked air

25 ~ 30m/s

Volume of sucked air

12000m 3 /h

Overall dimension

3250 × 2770 × 2440mm

Net mass

11500kg

All rights for technical modifications reserved. CE approval
                                          
 SR2A 13 Roller Feeding Sanders   

Model

SR2A13

Working width

40 ~ 1300mm

Working thickness

2.5 ~ 110mm

Size of abrasive belt

1330 × 2785 mm

Feed Speed

13 ~ 100m/min

Main motor power

30,30kW

Feed motor power

5.5kW

Working air pressure

0.55MPa

Speed of sucked air

25 ~ 30m/s

Volume of sucked air

9800m 3 /h

Overall dimension

2623 × 2770 × 2520mm

Net mass

9000kg

All rights for technical modifications reserved. CE approval
                                          
 SR2A 13D Double Side Calibrating Sander   

            SR2A13D

Model No.
SR2A13D
Working Width
200~1300 mm
Working Length
>900 mm
Working Thickness
3~90 mm
Sanding Belt Speed
Front
29  m/s
Rear
27  m/s
Size of Sanding Belt (W×P)
1350×2800mm; 1350×3000mm
Feeding Speed
6~30 m/min
Power
Main Motor
Front
75kW×2
Rear
75kW×2
Feeding Motor
15 kW
Lifting Motor
1.5 kW
Brush Motor
1.1 kW×2
Compressed Air
Pressure
0.6 MPa
Air Consumption
0.3 m3/min
Suction Air Consumption
Volume
32000 m3/h
Pressure
1300Pa
Average Air Speed
25~30 m/s
Overall Dimension (L×W×H)
3200×3900×2980mm
Net Weight
30 T
All rights for technical modifications reserved. CE approval
                                          
 SR2A 16D Double Side Calibrating Sander  

                SR2A16D

Parameter

SR2A 16D

Working Width 100~~1600mm
Working Length >900mm
Working Thickness 3~~120mm
Sanding Belt Front 26 m/s
Rear 24 m/s
Size of Sanding Belt (W × P) 1670 × 2850 mm
Feeding Speed 6~~30m/min
Power Main Motor Front 90kW × 2
Rear 75kW × 2
Feeding Motor 15kW
Lifting Motor 3kW
Brush Motor 1.1kW × 2
Compressed Air Pressure 0.6 MPa
Air Consumption 0.3 m 3 /min
Suction Air Consumption Volume 42000m 3 /h
Pressure 1300Pa
Average Air Speed 25~~30m/s
Net Weight 33T
All rights for technical modifications reserved. CE approval
                                          
 SR2A 20D Double Side Calibrating Sander  

Parameter

SR2A 20D

Working Width 100~~1600mm
Working Length >900mm
Working Thickness 3~~120mm
Sanding Belt Front 28 m/s
Rear 26 m/s
Size of Sanding Belt (W × P) 1670 × 2850mm
Feeding Speed 6~~30m/min
Power Main Motor Front 90kW × 2
Rear 75kW × 2
Feeding Motor 15kW
Lifting Motor 3kW
Brush Motor 1.1kW × 2
Compressed Air Pressure 0.6 MPa
Air Consumption 0.9m 3 /min
Suction Air Consumption Volume 42000m 3 /h
Pressure 1300Pa
Average Air Speed 25~~30m/s
Net Weight 37T
All rights for technical modifications reserved. CE approval
                                          
 Wide Belt Planer Sander SPRU600 with CE Approval

 

 

 

 

 

               SPRU600

Type SPRU 600
Working width 40-600mm
Working thickness 3-100mm
Working length > 500mm
Power of conveyer belt motor 2.2kw
Feed speed 4-16m/min
Size of abrasive belt (W×P) 630 × 1900mm
Mail motor power 11, 11, 5.5kw
Working air pressure 0.55MPa
Volume of sucked air 7630m 3 /h

Consumption of compressed air

0.06m3 /min
Overall dimension(L×W×H)

2238x1280x2012mm

Net weight 2430kg
All rights for technical modifications reserved. CE approval
                                          
 Wide Belt Planer Sander SPRU1000 with CE Approval

SPRU1000

Type SPRU 1000
Working width 40-1000mm
Working thickness 3-100mm
Working length > 500mm
Power of conveyer belt motor 4 kw
Feed speed 4-20m/min
Size of abrasive belt (W×P) 1030 × 2200mm
Mail motor power 18.5, 18.5, 18.5,kw
Working air pressure 0.55MPa
Volume of sucked air 7630m 3 /h

Consumption of compressed air

0.9 m 3 /min
Overall dimension(L×W×H) 2810 × 1670 × 2230mm
Net weight 4600kg
All rights for technical modifications reserved. CE approval
                                          
 Wide Belt Planer Sander SPRU1300 with CE Approval

SPRU1300

Type SPRU 1300
Working width 40-1300mm
Working thickness 3--100mm
Working length > 590mm
Power of conveyer belt motor 5.5kw
Feed speed 4-20m/min
Size of abrasive belt (W × P) 1330 × 2500mm
Mail motor power 22, 30, 18.5kw
Working air pressure 0.55MPa
Volume of sucked air 12000m 3 /h
Consumption of compressed air 0.2m 3 /min
Overall dimension (L × W × H) 3090 × 2060 × 2310mm
Net weight 5200kg
All rights for technical modifications reserved. CE approval
                                          
 Wide Belt Sander SAF1300 with CE Approval

Working width
40-1300mm
Working thickness
3-110mm
Working length
≥300mm
Longitudinally belt speed
3-18m/s
Crossing belt speed
3-16m/s
Size of Longitudinally abrasive belt
150x4800mm
Size of crossing abrasive belt
1330x2200mm
Size of lining belt
140x4350mm
Feed belt
1300x4470mm
Motors (KW)
Horizontal
15
Vertical
15
Feed
2.2
Vacuum suction
5.5
Lifting
0.37
Brush
0.37

Compressed Air
Working air pressure
0.55Mpa
Consumption
0.7M3/min
Sucked Air
Volume of sucked air
9500m3/h
Pressure
1300Pa
Speed of sucked air
25-30m/s
Overall Dimension
2600x2500x2230mm
Net weight
4300kg
All rights for technical modifications reserved. CE approval  
                                          
 Wide Belt Sander SDC1300 with CE Approval

 

 

 

 

 

 

 

               SDC1300

Type SDC 1300
Working width 40-1300mm
Working thickness 2.5-100mm
Working length ≥ 630mm
No:1 abrasive belt speed 18m/s
No:2 abrasive belt speed 12m/s
Feed speed 6-30m/min
Size of abrasive belt (W ×P) 1330×2200mm
Total motor power 37.74kw
Working air pressure 0.55MPa
Volume of sucked air 8000m 3 /h
Speed of sucked air 25-30m/s
Overall dimension (L×W×H) 2360×2030×2220mm
Net weight 3500kg
All rights for technical modifications reserved. CE approval
                                          
 Wide Belt Sander SSR1300 with CE Approval

            SSR1300

Type SSR 1300
Working width 50-1300mm
Working thickness 3-120mm
Working length ≥ 40mm
abrasive belt speed 20m/s
Feed speed 9-48m/min
Size of abrasive belt (W × P) 1330 × 2200mm
Total motor power 41.74kw
Working air pressure 0.55MPa
Volume of sucked air 7000m 3 /h
Speed of sucked air 25-30m/s
Overall dimension (L×W×H)

1841×2650×2010mm

Net weight 2320kg
All rights for technical modifications reserved. CE approval
                                          
 SCF1100 Curve Surface Sander  
Characteristics
SCF1100 curve surface sander specializes in polishing doors, cabinet doors, furniture etc. Thant is the ideal solution for different sanding applications including whitewood, colour-wood and lacquer sanding. It has 4 sanding system with own control inverter.

Specifications:
Working thickness
10-100mm
Lift motor of back brush roller
0.37kw
Working width
50-1100mm
Front brush plate motor
1.5kw
Front brush roller speed
50-300r/min
Back brush plate motor
1.5kw
Back brush roller speed
50-300r/min
Swing motor of front brush plate
0.37kw
Brush plate speed
50-300r/min
Swing motor of back brush plate
0.37kw
Brush plate group
10-60time/min
Feeding motor
2.2kw
Conveyor belt size (WXP)
1100x6560mm
Lift motor of feeding table
1.5kw
Front brush roller motor
2.2kw
Vacuum motor
7.5kwx2
Back brush roller motor
2.2kw
Volume of sucked air
9000m3/h
Lift motor of front brush roller
0.37kw
Speed of sucked air
25-30m/s
                                          
 SCF1300 Curve Surface Sander  
Characteristics
SCF1100 curve surface sander specializes in polishing doors, cabinet doors, furniture etc. Thant is the ideal solution for different sanding applications including whitewood, colour-wood and lacquer sanding. It has 5 sanding system with own control inverter.

 

 

Specifications:
Working Width 50-1300 mm
Working Thickness 10-100 mm
Working Length ≥250 mm
Brush Plate Speed 60 ~ 300 rpm
Brush Plate Swing 20 ~ 60 Times/min
Brush Roller Speed 100 ~ 450 rpm
Feeding Speed 4 ~ 18m/min
Total Motor 32.6 kW
Main Motor 1.5kW x 2, 4kW x 3
Working Air Pressure 0.6 Mpa
Compressed Air Consumption 0.01m3/min
Volume of Sucked Air 10000m3/h
Speed of Sucked Air 20 ~ 22m/s
Dimensions 3920 x 2290 x 2265 mm
Net Weight 5400kg
                                          
 ZXC 100 Auto-Slot-Cutting Machine      

Max. cutting length 100mm
Compressed Air Required 0.6-0.7Mpa
Max. Section Size 100×120mm
Min. Section Size 20×40mm
Cutters Rotating speed 10500 r/m
Cutters Fitting Diameter & Depth φ 13mm×40mm
Max Cutting Width ≦ 18mm
Cutting Angle 0-90°
Cutter Motor 1.1KW 2 Pole
Sliding Support Motor 0.75KW 6 Pole
Overall Dimension 3400×970×1250mm
Net Mass 538Kg
Slots Space (mm)
6.5-13-19.5-26-32.5-39-45.5-52-58.5-65-71.5-78-84.5-91-97.5mm
When two pieces of wood are processed, the general rack length is 3.3m.
All rights for technical modifications reserved. CE approval
                                          
 Vertical Vibrating Sander MM2615      
Sanding Speed 1050m/min

Size of Sanding Belt 2930x180mm
Motor Power 3kw
Overall Dimensions 1700x780x1050mm
Weight 550kg
                                          
 4 Head Water Sanding Machine MGRR1000        
MGRR1000 is a heavy duty professional sanding machine for marble, granite, steel ect. It can make according to customer's requirements.

Specifications
Working width 1000mm
Working thickness 2~110mm (2~350mm optional)
Speed of feeding belt 5~25m/Min
Total motor power 108.55kw (30/30/22/22/0.55/4kw)
Size of sanding belt 1020*2200mm
Overall dimensions 2110 x 3500 x 2110mm
Weight 5200Kgs