Wood working machine - moulder  
                                         
 4 Side Moulder QMBH33 Serials  
Features
1. The machine frame adopts high strength cast iron and big powerful motor. It can do heavily cutting and the cutting quality is good.
2. Fully safety cover provides protection from ejected chips and noise. It configures limit switch to guarantee the safety.
3. The work table is heat-treated by special technology and the surface is hard chromed, providing superior wear-resistance.
4. And the horizontal spindles are with outboard bearing.
5. The feeding wheel diameter is φ140 and there are multi group bottom driving rollers to guarantee perfect feeding performance.
6. Each spindle's control, fixing thickness and fixing width are controlled by PLC computer touch screen, It is easy and fast to operate.
7. Feeding adopts front, middle and back three section pneumatic hold down mechanism, providing stable pressure and easy adjustment.
8. The top spindle front pressing and the front side pressing of vertical spindle adopts pneumatic hold down mechanism, providing stable pressure and easy adjustment.
9. The second bottom blade has multi saw function, it can make multi sawing.
10.There are manual and computerized oil pumps. They lubricate the working table and movable guide orbit, guaranteeing the feeding smooth and the guide orbit agile.
11.All feeding and pressing adopt section pneumatic hold down mechanism and easy to operation.
12.Feeding is controlled by frequency inverter. The speed of feeding is 6~36m/min.
13.All the electric components and transmission units are purchased from quality international brands, guaranteeing reliability.
Optional:
1. CE configuration
2. Enhance capacitance of the power of motor
3. Out board bearing and high pressure oil gun
4. Increase the length of work table
5. Automatic feeding and automatic receiving framework
6. Each shaft is activated by Y-△ 
7. Every shaft adopts brake system
8. PLC computer touch screen is optional
Specifications

Model

QMBH833B-D

QMBH633B-D

QMBH533B-D

QMBH433B-D

Max.working width (φ140mm)

330mm

Min. working width (φ140mm)

50mm

Max.working thickness (φ140mm)

250mm

Min. working thickness (φ140mm)

20mm

Spindle quantity

8

6

5

4

Spindle speed r/min

7000

6000

Feed speed m/min

6-45m/min

6-36m/min

Spindle diameter

φ50mm

Cutter diameter First bottom cutter

φ140mm

Straightening cutter

φ165mm

Right vertical cutter

φ140-230mm

Left vertical cutter

φ140-230mm

Second right vertical Cutter

φ140-230mm

/

Second left vertical cutter

φ140-230mm

/

First top cutter

φ140-230

Second top cutter

φ140-230mm

/

Second bottom cutter

φ140-300

φ140-250

/

Total motor power

110kW/150Hp

84kW/114Hp

69.5kW/94Hp

56kW/76Hp

Motor power First bottom Spindle

11kW/15Hp

Right vertical cutter

11kW/15Hp

Left vertical cutter

11kW/15Hp

Second right vertical cutter

11kW/15Hp

/

Second left vertical cutter

11kW/15Hp

/

First top cutter

15kW/20Hp

Second top cutter

11kW/15Hp

/

Second bottom cutter

11kW/15Hp

/

Feed motor

15kW/20Hp

11kW/15Hp

7.5kW/10Hp

5.5kW/7.5Hp

Beam elevation

1.50kW/2Hp

Top spindle elevation

0.75kW/1Hp

Left vertical spindle horizontal movement

0.75kW/0.5Hp

0.37kW/0.5Hp

Rear pressing plate elevation

0.37kW/0.5Hp

/

Feeding wheel Diameter

φ180*φ40*50mm

Suction hood Diameter

φ180mm*8

φ180mm*6

φ180mm*5

φ180mm*4

Feeding table length

2000mm

Overall dimension

6550*2280*2090mm

6000*2280*2090mm

5370*2280*2090mm

4790*2280*2090mm

Packing dimension

6450*2300*2280mm

5830*2300*2280mm

5110*2300*2280mm

4630*2300*2280mm

Gross/Net weight

13600/12400Kgs

11000/9600Kgs

10000/8800Kgs

9000/8000Kgs

 

                                         
 4 Side Moulder QMBH26 Serials  
Features:
1. The machine frame adopts one piece high strength cast iron and big powerful motor. It can do heavily cutting and the cutting quality is good.
2. Full safety cover provides protection from ejected chips and noise. It configures limit switch to guarantee the safety.
3. The work table is heat-treated by special technology and the surface is hard chromed, providing superior wear-resistance.
4. The main spindle is heavy cutting configuration, the diameter of the main spindle is φ50mm. The rigidity of spindle is very good to keep the high quality.
5. The feeding wheel diameter is φ140 and there are multi-group bottom driving rollers to guarantee perfect feeding performance.
6. Each spindle's control, fixing thickness and fixing width are controlled by PLC computer touch screen. It is easy and fast to operate.
7. Feeding system adopts front, middle and rear three sections pneumatic hold-down mechanism, providing stable pressure and easy adjustment.
8. The front pressing top spindle and the front side pressing of vertical spindle adopt pneumatic hold-down mechanism, providing stable pressure and easy adjustment.
9. The second bottom spindle can be installed saw blade, so it can perform the sawing work.
10. There are two manual lubricating pumps. They lubricate the working table and moveable guide orbit, guaranteeing the feeding smooth and the guide orbit agile.
11. All feeding and pressing adopt section pneumatic hold-down mechanism and easy to operation.
12. Feeding is controlled by frequency inverter. The speed of feeding is 6-36m/min.
13. All the electric components and transmission units are purchased from quality international brands, guaranteeing reliability.
Optional:
1. CE configuration
2. Enhance capacitance of the power of motor
3. Out bear-boarding support and high pressure oil gun
4. Increase the length of work table
5. Automatic feeding and automatic receiving framework
6. Each shaft is activated by Y-△
7. Every shaft adopts brake system
8. PlC computer touch screen is optional.

Specifications:

Model QMBH626B-K QMBH526B-K QMBH426B-K
Max. working width (φ125) 260mm
Min. working width (φ125) 30mm
Max. working thickness (φ125) 125mm
Min. working thickness (φ125) 10mm
Spindle quantity 6 5 4
Spindle speed r/min 6800
Feed speed m/min 6-36m/min
Spindle diameter φ50mm
Cutter diameter-First bottom cutter φ125-φ140
Straightening cutter φ152-φ165mm
Right vertical cutter φ118-φ200
Left vertical cutter φ118-φ200
First top cutter φ118-φ200
Second top cutter φ118-φ200 /
Second bottom cutter φ118-φ200 φ118-φ250 /
Total motor power 71.68kW/97.25Hp 60.68kW/82.25Hp 47.68kW/64.75Hp
Motor Power - First bottom spindle 7.5kW/10Hp
Right vertical cutter 11kW/15Hp
Left vertical cutter 11kW/15Hp
First top cutter 11kW/15Hp
Second top cutter 11kW/15Hp /

Second bottom cutter

11kW/15Hp /

Feed motor

7.5kW/10Hp 5.5kW/7.5Hp

Beam elevation

0.75kW/1Hp

Top spindle elevation

0.75kW/1Hp

Left vertical spindle horizontal movement

0.18kW/0.25Hp

Pressing plate wheel Diameter

φ140*φ35*50mm
Suction hood Diameter φ150mm*6 φ150mm*5 φ150mm*4
Feeding table Diameter 2000mm
Overall dimension 5250*1980*1830mm 4500*1980*1830mm 3980*1980*1830mm
Packing dimension 5120*2060*2220mm 4360*2060*2220mm 3850*2060*2220mm
Net Weight 6700Kgs 5900Kgs 5100Kgs
                                         
 4 Side Moulder QMB23 Serials  
Features:
1. One piece cast iron frame, providing sufficient stability and strength.
2. Complete safety hood against noise and dust, with automatic power OFF protection for opening.
3. The main spindles are processed, assembled and dynamically balanced, guaranteeing superior stability and accuracy.
4. The work table surface adopts special material and is hard chromed, providing sufficient wear-resistance.
5. Feeding system adopts front, middle and rear three section pneumatic hold-down mechanisms, providing stable pressure and easy adjustments.
6. More motorized bottom feeding rollers are applied to the work table, from the front to the rear end, guaranteeing perfect feeding performance.
7. Manual pump for centralized lubrication of the work table surface and dovetail plates. No more overlooked lubrication points maintenance.
8. The first bottom spindle is equipped with straightening cutter groove and the front and rear table plate is inlayed with alloy steel plates, guaranteeing precise processing quality and wear-resistance.
9. Pneumatic switch on the operation panel controls the first two groups of wheels for quick engagement and disengagement, for planing or straightening.
10. The second bottom spindle is able to do works of multiple rip saw.
11. All the electric components and transmission units are purchased form quality international brands, guaranteeing reliability.
12. Variable feeding speed controlled by the frequency converter with digital display, feeding speed from 5-26 m/min.
13. Easy- to -understand operation panel. Everything at a glance and under control.    
Optional:    
1.CE configuration.
2. Enhance capacitance of the power of electrical power shaft.
3. The feeding table is increased by 2500-3000.
4. The surface of the electrical pump lubricating table.
5. Every main axis adopts brake system.
6. Every shaft is activated by Y-△。
7. QMB623A-K is installed with a computer touch screen. 

Specifications:

Model

QMB423A

QMB523A

QMB623A/QMB623A-K

QMB623B/QMBH623B-K/QMBH623B-D

Max.working width

230mm

Min. working width

20mm

Max.working thickness

125/160mm

Min. working thickness

8mm

Spindle quantity

4

5

6

6

Spindle speed r/min

6800

6500

Feed speed m/min

5-26m/min

6-36m/min

Spindle diameter

φ40mm

φ40/50mm(Optional)

Cutter diameter First bottom cutter

φ125mm

Straightening cutter

φ152mm

Right vertical cutter

Φ108-Φ200mm

Left vertical cutter

Φ108-Φ200mm

First top cutter

Φ108-Φ170mm

Φ108-Φ200mm

Second top cutter

/

Φ108-Φ170mm

Φ108-Φ200mm

Second bottom cutter

/

Φ108-Φ230mm

Φ108-Φ250mm

Motor power First bottom Spindle

5.5KW/7.5HP

Right vertical cutter

5.5KW/7.5HP

Left vertical cutter

7.5KW/10HP

Second right vertical cutter

11kW/15Hp

/

Second left vertical cutter

11kW/15Hp

/

First top cutter

7.5KW/10HP

11KW/15HP

Second top cutter

/

7.5KW/10HP

Second bottom cutter

/

7.5KW/10HP

Feed motor

4KW/5.5HP

5.5KW/7.5HP

7.5KW/10HP

Beam elevation

0.75KW/1HP

Top Power

30.75KW/41.5HP

38.25KW/51HP

47.25KW/63HP

53.50KW/72HP

Feeding wheel Diameter

Φ140xΦ35x50mm

Suction hood Diameter

Φ150mm

Overall dimension

3820x1890x1750mm

4280x1900x1750mm

4960x1900x1750mm

5250x1930x1860mm

Net weight

4150Kgs

4600Kgs

5600Kgs

6650Kgs

                                         
 4 Side Moulder QMB412   
Features:
QMB412 is a new small four spindle four-side moulder according to the requirement of the customer, it is main used for short material and woodwork, it is the economic and useful machine for solid wood furniture factory, finger joint wood manufacturing plant and woodwork industry.
1. One piece cast iron frame with aging treatment, providing sufficient stability.
2. Advantage: the min. working length is 180mm (continuation feeding).
3. Feeding system adopts cardan joint and belt speed variator for transmission, providing superior reliability and easy operation. Feeding speed can come to 6~24m/min.
4. The worktable surface adopts special material and is hard chromed, providing sufficient wear-resistance.
5. Pneumatic hold- down system, providing stable pressure and easy adjustments.
6. Pneumatic short piece feeding mechanism, fully guaranteeing the transport of short pieces. No piece gets stuck and no burns left on the piece.

Specifications:

Parameter QMB412
Max. working width 120mm
Min. working width 20mm
Max. working thickness 100mm
Min. working thickness 8mm
Min. working length continuation/interruption 180/450mm
Moveable workable working quantity profile/flat surface 6/6mm
Spindle speed 6800 r/min
Feed speed 6~24 m/min
Spindle diameter φ40mm
Cutter diameter -Bottom level cutter (Side cutter) φ125/φ152mm
Right vertical cutter φ115~φ140mm
Left vertical cutter φ115~φ140mm
Top level cutter φ105~φ140mm
Motor power (Total power) 15.95kW
Bottom level spindle 3kW
Right vertical spindle 3kW
Left vertical spindle 3kW
Top level spindle 4kW
Feed/elevation 2.2/0.75kW
Air source pressure 0.20~0.5MPa
Dust collection diameter φ120mm
Overall dimensions 2890*1460*1660mm
Weight 2200Kgs
                                         
 4 Side Moulder QMB20 Serials  
Features:
1. One piece cast iron frame, providing sufficient stability and strength.
2. Complete safety hood against noise and dust, with automatic power OFF protection.
3. The main spindles are precisely processed, assembled and dynamically balanced, guaranteeing superior stability and accuracy
4. The worktable surface adopts special material and is hard chromed, providing sufficient wear-resistance.
5. Motorized bottom feeding rollers are applied to the front and rear work table, guarantee perfect smooth feeding performance
6. All main spindles are driven by separate motors, providing sufficient cutting force.
7. Pneumatic hold-down system, providing stable pressure and easy adjustment.
8. Straightening cutter is able to be applied to the first bottom spindle, guaranteeing the straightness of the work piece.
9. Pneumatic short piece feeding mechanism, fully guaranteeing the transport of short pieces. No piece gets stuck and no burns left on the piece.
10. All the electric components and transmission units are purchased from quality international brands guaranteeing reliability.
Optional:  
1. CE configuration.
2. Enhance capacitance of the power of electrical power shaft.
3. The surface of the electrical pump lubricating table.
4. Every shaft adopts brake system.
5. Every shaft is activated by Y-△

Specifications:

Model QMB620A QMB520A QMB420A
Max. working width 

200mm

Min.  working width

20mm

30mm

Max. working thickness

125mm

Min.  working thickness

8mm

Spindle quantity

6

5

4

Spindle speed

6800 r/min

Feed speed

6~24 m/min

Spindle diameter

Φ40mm

First bottom cutter

Φ125mm

Straightening cutter

Φ152mm

Right vertical cutter

Φ110-Φ180mm

Left vertical cutter

Φ110-Φ180mm

First top cutter

Φ110-Φ180mm

Second top cutter

Φ110-Φ200mm

/

Second bottom spindle

Φ110-Φ200

/

First bottom spindle motor

5.5KW/7.5HP

Right vertical spindle motor

5.5KW/7.5HP

Left vertical spindle motor

5.5KW/7.5HP

First top spindle motor

7.5KW/10HP

Second top spindle motor

5.5KW/7.5HP

/

Second bottom spindle motor

5.5KW/7.5HP

/

Feed motor

4.0KW/5.5HP

3.0KW/4HP

Beam elevation

0.75KW/1HP

Total motor power

40KW/54HP

34.25KW/46.5HP

21.25KW/29HP

Feeding wheel Diameter

Φ140xΦ35x50mm

Suction hood Diameter

Φ120mm

Overall dimensions

4000x1780x1750mm

3500x1780x1750mm

3270x1700x1750mm

Packing dimensions 

4120x1860x2130mm

3600x1860x2130mm

3380x1820x2080mm

Weight 

4400Kgs

3600Kgs

3300Kgs